CS-1000 P4 - Core drill rig
DEPTH CAPACITY CORINGDEPTH CAPACITY CORING - B WIRELINE 3,500 FT (1,070 M)
- N WIRELINE 2,000 FT (610 M)
- H WIRELINE 1,500 FT (460 M)
- P WIRELINE 1,000 FT (305 M)
- MAIN HOIST
- SINGLE LINE CAPACITY: BARE DRUM 9,000 LB (4,082 KG)
- DOUBLE LINE CAPACITY: BARE DRUM 18,000 LB (8,164 KG)
- LINE SPEED: BARE DRUM 148FT/MIN (45M/MIN)
- WIRELINE
- CAPACITY: 3,200 FT (975 M) OF 3/16 IN (4.76 MM)
- LINE PULL BARE DRUM: 2,500 LB (1,134 KG)
- LINE PULL FULL DRUM: 840 LB (381 KG)
- LINE SPEED: BARE DRUM: 390 FT/MIN (119 M/MIN)
- FULL DRUM: 1,260FT/MIN (384 M/MIN)
- MAST AND FEED SYSTEM
- FEED TRAVEL: 6 FT (1,830 MM)
- THRUST: 13,300 LB (6,030 KG)
- PULL: 20,000 LB (9,070 KG)
- DRILLING ANGLE: 45 TO 90 DEGREES
- ROD PULL LENGTH: 20 FT (6.09 M)
CS-1000 P6 - Core drill rig
- DEPTH CAPACITY CORING (WIRELINE ORCONVENTIONAL)
- B WIRELINE - 3,500 FT (1,070 M)
- N WIRELINE - 2,500 FT (762 M)
- H WIRELINE - 1,500 FT (460 M)
- P WIRELINE - 1,000 FT (305 M)
- MAIN HOIST
- SINGLE LINE CAPACITY: BARE DRUM - 9,000 LB (4,082 KG)
- DOUBLE LINE CAPACITY: BARE DRUM - 18,000 LB (8,164 KG)
- LINE SPEED: BARE DRUM - 148FT/MIN (45M/MIN)
- WIRELINE
- CAPACITY: 6,000 FT (1,830 M) OF 3/16 IN (4.76 MM)
- 3,200 FT (975 M) OF 1/4 IN (6.35 MM)
- LINE PULL BARE DRUM: - 2,500 LB (1,134 KG)
- FULL DRUM: - 700 LB (318 KG)
- LINE SPEED: BARE DRUM - 390 FT/MIN (119 M/MIN)
- FULL DRUM - 1,500 FT/MIN (457 M/MIN)
- MAST AND FEED SYSTEM
- FEED TRAVEL: - 6 FT (1,830 MM)
- THRUST: - 13,300 LB (6,030 KG)
- PULL: - 20,000 LB (9,070 KG)
- DRILLING ANGLE: - 45 TO 90 DEGREES
- ROD PULL LENGTH: - 20 FT (6.09 M)
CS-14 - Core drill rig
- Depth capacity coring (wireline or conventional)
- B wireline - 1540 m (5052 ft)
- N wireline - 1200 m (4042 ft)
- H wireline - 800 m (2695 ft)
- P wireline - 475 m (1558 ft)
- Main hoist
- Single line capacity: Bare drum - 80 kN (18 000 lb)
- Line speed: Bare drum - 44 m/min (148 ft/min)
- Wireline
- Capacity: 1830 m (6000 ft) of 4,76 mm (3/16 in)
- 975 m (3200 ft) of 6,35 mm (1/4 in)
- Line pull: bare drum: 11,9 kN (2665 lb)
- full drum: 3,0 kN (668 lb)
- Line speed: bare drum 114 m/min (374 ft/min)
- full drum 453 m/min (1486 ft/min)
- Mast and feed system
- Feed travel: 3,5 m (11,5 ft)
- Thrust: 59,6 kN (13 390 lb)
- Pull: 138 kN (31 020 lb)
- Drilling angle: 45 to 90 degrees
- Rod pull length: 6,09 m (20 ft)
EXPLORAC R50 - Reverse circulation drilling rigs
- Hole depth – 150m (4” Rod)
- Hole depth – 200m (3 ½” Rod)
- Pulldown - 48,8 kN
- Hold back/lift - 80,9 kN
- Drill pipe length - 3,0 m
- Compressor max. pressure - 25 bar
